Equalizing Manifold Valve - HE30 Series
The HE30 Series is a 3-valve equalizing manifold that is a compact and cost effective alternative to the more costly 5 valve manifold. Derin soft seat valves insure redundant equalizer isolation, eliminating the possibility of costly leaks there, or through the vent/calibrate valve. That feature...
Rigid Mount Manifolds  - HM16 Series
Hex Rigid Mount Manifolds mount directly to the pipe stand securing the impulse lines so the transmitter can be installed or removed independently of the piping. They feature a "standard" two or three valve manifold or a blowdown manifold with an integral, welded mounting plate. The secure, welded...
Metering Manifold Valves - HM37 Series
The HM37 Five Valve Manifold combines two shutoff valves, two equalizing valves, and a vent/calibration valve into a single, compact assembly. Accuracy is paramount in the upstream and downstream hydrocarbon measurement world. When expensive liquid or gas changes ownership, precise measurement...
Horizontal Twist Manifold Adapter - HM37A Series
The adapter is used on a direct mount system that domes off horizontally from the orifice fitting. Instead of using a 5 valve angle manifold, you would use this to make the angle from horizontal to vertical. The benefit with this design is that with a slight incline in porting inside the adapater,...
In-Line Three Valve Manifold - HM45 Series
The HM45 Series is a general purpose instrument manifold designed for connecting differential pressure transmitters or flow records to impulse line tubing. Connections are 1/2" NPT on industry standard 3-2/8" center-to-center dimensions (models for 2-3/16" and 2-1/4" center-to-center dimensions are...
In-Line Three Valve Manifold with Vent - HM46 Series
The HM46 Series is the same design as the HM45, but also incorporating a vent valve allowing a technician to perform instrument bleed or blowdown procedures. Both models provide one compact valve assembly to perform the block and equalizing functions required to calibrate your instruments. They...
Two Valve Manifolds - Static Pressure - HM50 Series
The HM50 Series is a single flanged static pressure manifold that incorporates a primary block valve, a bleed valve and a secondary shutoff valve into a single valve assembly. The secondary shutoff and bleed valve also allows the gauge and transmitter to be removed or bled without requiring...
Single Flanged Three Valve Manifolds - HM53 Series
The HM53 Series is a three valve instrument manifold used to perform the block, equalizing and vent requirements of a differential pressure transmitter applications. Of importance in this design is the inclusion of a single mounting flange that allows the transmitter to bolt directly to the...
Double Flanged Three Valve Manifold - HM54 Series
A double flanged instrument manifold that is used to perform the block, equalizing and vent requirements of differential pressure transmitters. For compact, close-coupled installations, the manifold bolts directly to the instrument and can be mated directly to the orifice flange using futbol...
Five Valve Manifolds - Blowdown - HM56/55 Series
For differential pressure applications, the Hex five valve blowdown manifold performs the block and equalizing functions of a standard three valve manifold and provides two additional block valves to be used for blowdown purposes. To blow down the impulse lines, the block valves on the manifold are...
Five Valve Manifold - Metering - HM57 Series
The HM57 Five Valve Manifold combines two shutoff valves, two equalizing valves, and a vent/calibration valve into a single, compact assembly. The double equalizing arrangement insures against measurement error that can occur from equalizer leakage between high and low pressure connections, making...
Two Valve Manifolds - Level  - HM58 Series
The HM58 Level Manifold is a simplified, lower cost alternative to D/P level installations. The HM58 allows the user to construct a level installation with minimal components. This method eliminates the need for tubing, fittings, instrument pipe stands and their associated installation costs.
Two Valve Manifolds - Static Pressure  - HM59 Series
The HM59 Series is a line-mounted two valve manifold that functions as a shutoff and bleed valve for static pressure instrumentation. Compared to traditional piping methods that use an arrangement of nipples, pipes, elbows and tees, and gate valves, the HM59 Series will provide alow cost, easy-to-...
Isolation Two-Valve Manifolds  - HM72 Series
When used in a direct mount system, the HM72 two valve connector provides two block valves and two ports for adding additional measurement devices. It can also act as a spacer, increasing the distance between the measurement devices and the orifice fitting. As in the HM37 manifold, the HM72 is...
Isolation Two-Valve Manifolds - HM73 Series
THe HM73 is a versatile and economical angle pattern shutoff valve. It is the easiest way to change direction from horizontal to vertical mounting of a transmitter or flow computer on an orifice fitting or orifice flange union. To change direction, just add this between your direct mount system and...
Three Valve Direct Mount Manifolds - HM88 Series
The HM88 Three Valve Direct Mount Manifold is designed for close-coupled mounting of a differential pressure transmitter to an orifice flange. The rugged body of this heavy-duty manifold has two sets of outlets allowing versatility in mounting and convenient access for transmitter calibration....